How do you clean a teflon with baked on oil?

- Baking soda

- Water

- White vinegar

- Non-abrasive sponge or cloth

Instructions:

1. Create a Baking Soda Paste:

- Mix baking soda and water to create a thick paste. The ratio should be approximately 3 parts baking soda to 1 part water.

2. Apply the Paste to the Stained Areas:

- Apply the baking soda paste to the areas where the baked-on oil is present. Make sure to cover the stains completely.

3. Let it Sit:

- Allow the baking soda paste to sit on the surface for at least 30 minutes. This will give it time to work on breaking down the oil.

4. Scrub the Surface:

- After 30 minutes, use a non-abrasive sponge or cloth to scrub the surface gently. Be careful not to apply too much pressure, as you don't want to damage the Teflon coating.

5. Rinse Thoroughly:

- Rinse the surface thoroughly with warm water to remove the baking soda residue. Ensure all traces of the paste are gone.

6. Use White Vinegar (Optional):

- If there are still some stubborn stains, you can try using white vinegar. Apply a small amount of white vinegar to the remaining stains and let it sit for a few minutes before scrubbing again.

7. Rinse and Dry:

- Rinse the surface one more time with warm water to remove any remaining vinegar. Pat the surface dry with a clean cloth or allow it to air dry.

8. Repeat if Necessary:

- If there are still some traces of baked-on oil, repeat the process as needed. Be patient, as removing stubborn stains may require multiple attempts.

Note:

- Always test a small, inconspicuous area before applying any cleaning solutions to the entire Teflon surface. This will help ensure that the cleaning method does not damage your cookware.

- Avoid using abrasive cleaning tools, such as steel wool or harsh scouring pads, as they can damage the Teflon coating.

- Never overheat Teflon cookware, as this can cause the coating to break down and make it more susceptible to staining.