How do you replace a coil on your Kenmore stove top?

Replacing the coil on a Kenmore stovetop is a relatively straightforward repair. Follow these steps:

1. TURN OFF THE POWER SUPPLY TO THE STOVETOP. This can be done by flipping the circuit breaker that controls the stovetop to the "Off" position, or by unplugging the stovetop from the outlet.

2. REMOVE THE OLD COIL. Locate the screws that hold the coil in place and remove them. Be careful not to drop the screws into the stovetop. Once the screws are removed, you should be able to lift the coil off the stovetop.

3. CLEAN THE COIL AREA. Use a damp cloth to clean the area where the old coil was located. Make sure to remove any food residue or grease.

4. CONNECT THE NEW COIL TO THE WIRES. The new coil will come with two wires: a red wire and a black wire. The red wire should be connected to the red terminal on the stovetop, and the black wire should be connected to the black terminal. Make sure the wires are securely connected.

5. ATTACH THE NEW COIL TO THE STOVETOP. Place the new coil over the coil area and secure it with the screws that you removed earlier. Make sure the screws are tight so the coil is secure.

6. TURN ON THE POWER SUPPLY TO THE STOVETOP. Flip the circuit breaker back on, or plug the stovetop back into the outlet.

7. TEST THE NEW COIL. Turn on the stovetop and select a heat setting. The coil should heat up quickly and evenly.

Now you've successfully replaced the coil on your Kenmore stove top!