How do you hard wire a cooker?

Hardwiring a cooker requires electrical expertise and should only be attempted by a qualified electrician. Here are the general steps involved in hardwiring a cooker:

1. Safety First:

- Turn off the power supply to the circuit that will be used for the cooker.

- Lock out or tag out the circuit breaker to ensure that power cannot be accidentally restored.

2. Preparing the Wiring:

- Verify the electrical requirements of the cooker to determine the appropriate wire size and circuit breaker rating.

- Run the necessary electrical cables from the circuit breaker panel to the location where the cooker will be installed.

3. Installing the Isolation Switch:

- Fit an isolation switch near the cooker to allow easy disconnection of power. This is a safety measure to isolate the cooker from power before any maintenance or servicing.

4. Connecting the Wires:

- Connect the live (hot) wire to the terminal marked "L" on the cooker.

- Connect the neutral wire to the terminal marked "N" on the cooker.

- Connect the earth (ground) wire to the terminal marked "E" or the symbol for earth on the cooker.

- Secure all wire connections tightly to ensure proper contact.

5. Testing:

- Turn on the power supply to the circuit.

- Check that all the cooker functions are working correctly, including the hob and oven.

- Ensure that there are no loose connections or sparks.

6. Safety Checks:

- Make sure that all wires are properly insulated and protected from any sharp edges or heat sources.

- Ensure that the cooker is securely fixed in place following manufacturer guidelines.

- Test the residual current device (RCD) or ground fault circuit interrupter (GFCI) to verify that it is operating correctly.

7. Labeling and Documentation:

- Label all wires and connection points clearly for future reference.

- Document the work performed, including any circuit changes or modifications.

- Keep all electrical documentation safely for future reference.

8. Final Safety Checks:

- Double-check all connections to ensure they are tight and secure.

- Test the cooker again to ensure it is functioning correctly.

Note: Hardwiring a cooker can be a complex task that requires knowledge of electrical codes and regulations. If you are not confident in your electrical abilities, it is strongly advised to consult with a certified electrician to ensure the safety and proper installation of your cooker.