What is the recipe to make your own Gunite including an acrylic cement bonding agent?

- Portland cement

- Sand

- Gravel

- Water

- Acrylic cement bonding agent

The proportions of these materials will vary depending on the desired strength and properties of the Gunite. However, a common recipe is:

- 1 part cement

- 2.5 parts sand

- 4 parts gravel

- 0.5 parts water

- 1% acrylic cement bonding agent

Instructions:

1. Mix the cement, sand, and gravel together in a dry mixer.

2. Add the water and acrylic cement bonding agent to the mixture and mix until well combined.

3. The mixture should be a consistent, soupy consistency.

4. Apply the Gunite to the desired surface using a spray gun.

5. Allow the Gunite to cure for at least 28 days before putting it into service.

Note:

- It is important to wear gloves and a dust mask when mixing and applying Gunite.

- Gunite is a hazardous material and should be handled with care.