How do you use trewax stone and tile sealer?

1. Surface Preparation:

- Make sure the surface is clean and dry.

- Remove any dirt, grease, or other contaminants from the surface.

2. Testing the Sealer:

- Apply the sealer to a small, inconspicuous area to test for compatibility.

- Wait for the sealer to dry completely according to the manufacturer's instructions.

- Check for any adverse effects on the surface, such as discoloration or alteration in texture.

3. Apply the Sealer:

- Apply the sealer using a roller, sponge, or brush in thin and even coats.

- Ensure the entire surface is covered without excessive pooling.

4. Allow the Sealer to Penetrate:

- Let the sealer penetrate the surface for the recommended time as per the manufacturer's instructions.

- This allows the sealer to form a protective barrier deep within the pores.

5. Remove Excess:

- After the specified penetration time, wipe off any excess sealer using a clean cloth.

- Be thorough to ensure there's no leftover residue on the surface.

6. Drying and Curing Time:

- Allow the sealer to dry and cure completely.

- The drying time can vary depending on the product, so refer to the manufacturer's instructions for specific details.

- Avoid using the treated surface or exposing it to water during the curing period.

7. Post-Sealing Care:

- Once the sealer has cured, avoid using abrasive cleaning agents or harsh chemicals on the treated surface.

- Regular cleaning with mild detergent and water should suffice to maintain the sealed surface.

Note:

- Before applying TreWax Stone and Tile Sealer, consult the product label and manufacturer's instructions to ensure proper usage and any specific precautions.

- Always test the sealer on a small area before applying it to the entire surface.