How do you make wrinkle crepe fabric?

1. A piece of fabric that is 100% cotton or a cotton blend

2. A spray bottle filled with water

3. A hot iron

4. A piece of cardboard or a book

Instructions:

1. Preheat the iron to the hottest setting.

2. Lay the fabric out flat on a table.

3. Spray the fabric evenly with water until it is damp.

4. Place the cardboard or book on top of the fabric.

5. Press the iron down on the cardboard or book for about 10 seconds.

6. Lift the cardboard or book and check the fabric. The fabric should now be wrinkled.

7. Repeat steps 4-6 until the entire fabric is wrinkled.

8. Allow the fabric to dry completely before using it.

Tips:

* To create different types of wrinkles, you can try using different weights of cardboard or books. You can also try pressing the iron down on the fabric for different lengths of time.

* If you want the wrinkles to be permanent, you can heat-set the fabric by drying it on a high heat setting in the dryer.

* Wrinkle crepe fabric can be used to make a variety of items, such as dresses, skirts, blouses, and pants. It can also be used as a decorative trim.