How do you change the two bearings on rotoflex pizza ovens?

To replace the bearings on a Rotoflex pizza oven, follow these steps:

1. Disconnect the power to the oven.

2. Remove the top and bottom covers of the oven.

3. Locate the two bearings on the front and rear of the oven.

4. Remove the bearing covers and bolts, then remove the bearings from the oven.

5. Install the new bearings into the oven.

6. Reinstall the bearing covers and bolts.

7. Replace the top and bottom covers of the oven.

8. Reconnect the power to the oven and test it to ensure that it is working properly.

Here are some additional tips for changing the bearings on a Rotoflex pizza oven:

* Make sure that you have the correct replacement bearings for your oven model.

* Be careful not to damage the oven when removing the covers and bearings.

* If you are not comfortable performing this repair yourself, you can contact a qualified technician to do it for you.