What doyou do when the tropical fish eggs had hatch and you have to clean tank?

1. Prepare a Temporary Container

- Ensure that you have a clean and suitable temporary container ready, such as a small aquarium, a bucket, or a plastic tub, to house the hatched fry.

- Make sure that the temporary container is about half-filled with the same water from the original tank. This helps maintain the fry's water parameters.

2. Remove the Egg Substrate

- Gently remove the egg substrate from the original tank, whether it's a breeding net, spawning mop, or any other material the eggs were attached to.

- Dispose of the egg substrate properly.

3. Clean the Original Tank

- Start by unplugging any electrical equipment, such as filters and heaters, from the power source.

- Drain about 25-35% of the tank water into a separate container. This water can be reused later.

- Use a soft sponge or a designated aquarium cleaning tool to gently wipe the inside surfaces of the tank, removing any visible dirt or debris.

- Rinse the tank thoroughly with clean, chemical-free water to remove any residual cleaning solution.

4. Rinse the Filter Media (if Necessary)

- If your filter uses mechanical media, such as filter floss or foam, rinse it gently under running water to remove excess dirt and debris.

- Avoid using soap or other cleaning products, as these can harm the beneficial bacteria in the filter media.

5. Refill the Tank

- Refill the tank with the reserved tank water and gradually add fresh, dechlorinated water to reach the desired level.

- Check the water temperature to ensure it's within the optimal range for your fish species.

6. Transfer the Fry to the Tank

- Gently introduce the hatched fry from the temporary container back to the cleaned tank.

- Use a net to scoop them carefully and avoid making sudden movements that might stress the fry.

7. Monitor the Water Quality

- Keep a close eye on the water quality in the days following the tank cleaning, as disturbances can cause fluctuations.

- Test the water parameters regularly and make necessary adjustments, such as temperature, pH, and chlorine levels.

8. Feed the Fry Accordingly

- Provide appropriate food for the fry, such as small live food or finely crushed flake food, in small amounts several times a day.

9. Maintain Regular Maintenance

- Continue with regular tank maintenance, such as small partial water changes and filter maintenance, to keep the water quality optimal for the growing fry.