How do you fit a kitchen cupboard with metal brackets and plates?

Fitting kitchen cupboards with metal brackets and plates usually involves the following steps:

1. Gather the necessary materials: Cabinet, brackets, plates, screws, level, screwdriver/drill.

2. Determine the position:

- Measure and mark the location where the brackets will be installed inside the cabinet.

- Ensure that the brackets will align with the cabinet's edges and any mounting holes on the plates.

3. Prepare the brackets:

- Install the brackets on one side of the cabinet.

- Depending on the type of bracket, there may be holes or slots for the mounting plates.

4. Fix the plates:

- Place the mounting plates on the brackets, ensuring they align with the holes or slots.

- Secure the plates to the brackets using the provided screws.

5. Level adjustment:

- Ensure the plates are level using a spirit level. Adjust as needed by tightening or loosening the screws.

6. Repeat on the other side:

- Repeat steps 3-5 for the other side of the cabinet. Make sure the brackets and plates are aligned across both sides.

7. Mount the cabinet:

- Position the cabinet in its intended location.

- Using a drill or screwdriver, drive screws through the mounting holes in the plates into wall studs or other secure wall support.

8. Final check:

- Verify that the cabinet is securely attached and level.

9. Install additional plates:

- If needed, add additional plates and brackets for increased support, especially for heavier cabinets.

Note: The exact process may vary based on the specific bracket and plate system used. Always refer to the manufacturer's instructions for precise installation guidelines.