How do I remove the old handle from my WagnerWare pot?

Before you begin removing the handle, carefully inspect it to identify the type of attachment. WagnerWare pots typically use either two screws or a single rivet to secure the handle.

Step 2: Gather the Necessary Tools

depending on the attachment type you find on your pot:

- Phillips-head screwdriver (for two screws)

- Flat-head screwdriver (for the rivet)

Step 3: Remove the Handle Screws

If the handle is attached using two screws, locate them on either side of the handle. Use the appropriate screwdriver to remove the screws carefully and set them aside.

Step 4: Removing the Handle Rivet

If the handle is attached using a single rivet, you'll need to remove it using the flat-head screwdriver. To do this:

1. Position the flat-head screwdriver under the head of the rivet, between the handle and the pot.

2. Gently pry the rivet upwards, applying enough force to break the rivet head off.

Step 5: Detach the Handle

Once the screws or rivet are removed, you can gently detach the handle from the pot.

Step 6: Clean the Handle Attachment Area

After removing the handle, use the flat-head screwdriver to clean the area where it was attached. Remove any remaining debris or rust, if present.

Step 7: Reinstall the Handle (Optional)

If you're replacing the old handle with a new one, follow the steps in reverse order to secure the new handle to the pot. Ensure the screws or rivets are tightened firmly.

By following these steps, you can safely and effectively remove the old handle from your WagnerWare pot.