How do you get a spray bottle that stops spraying to start again?

Here are some steps to try to get a spray bottle that stops spraying to start again:

1. Check the nozzle: Make sure the nozzle of the spray bottle is clear and free of any blockages or debris. Rinse the nozzle with warm water and use a soft brush or needle to remove any accumulated dirt or residue.

2. Check the liquid level: Ensure that there is enough liquid inside the spray bottle. If the liquid level is too low, the bottle may not be able to generate enough pressure to spray.

3. Pressurize the bottle: Some spray bottles have a mechanism to pressurize or prime them before use. Follow the specific instructions provided with your spray bottle to properly pressurize it.

4. Shake the bottle: Vigorously shake the spray bottle before attempting to spray. This can help to mix the liquid and create enough pressure to get it spraying again.

5. Clean the bottle: If the spray bottle has not been cleaned regularly, it may have accumulated mineral deposits or residue inside. Clean the bottle thoroughly with warm water and dish soap, then rinse it well and allow it to dry completely before refilling it.

6. Check the spring: Some spray bottles have a small spring inside the nozzle mechanism. Make sure the spring is properly seated and not damaged. If the spring is missing or damaged, it may need to be replaced.

If you have tried these steps and the spray bottle still does not work properly, it may be time to replace it with a new one.