How do you remove chewing gum from a paintwork?

Removing chewing gum from paintwork requires careful techniques to prevent damage to the surface. Here's a step-by-step process:

Materials:

- Scraper or plastic card

- Ice cube

- Isopropyl alcohol

- Microfiber cloth

Steps:

1. Scrape Off:

- Use a plastic scraper or card to gently pry off the gum without damaging the paint. Take care not to dig into the paint.

2. Apply Ice:

- Place an ice cube directly on the remaining gum. Leave it for a few minutes to harden and become brittle.

3. Scrape Again:

- Once the gum has hardened, use the scraper to gently remove it. The hardened gum should come off more easily.

4. Isopropyl Alcohol:

- If there's still gum residue, apply a small amount of isopropyl alcohol onto a microfiber cloth.

5. Wipe Residue:

- Gently rub the microfiber cloth with isopropyl alcohol over the gum residue. It should loosen and come off.

6. Final Cleaning:

- Rinse the area with water and dry it with a clean microfiber cloth to remove any remaining alcohol.

7. Waxing:

- After removing the gum and residue, it's a good practice to apply a coat of wax to the affected area to restore the paint's finish.

Note:

- Be patient and work slowly to avoid scratching or damaging the paintwork.

- For particularly stubborn gum, you can try using a mild adhesive remover, following the product instructions carefully.

- If you're not comfortable with the process or unsure about your car's paint, consider taking it to a professional detailer.