Instructions

1. Measure the dimensions of the whiskey bottle and use these measurements to determine the size of the label. For instance, if one side of the bottle measures 4 inches by 5 inches, a label measuring 3 inches by 4 inches may be appropriate.

2. Open your word processing program. Adjust the page margins to suit the measurements for the label. For a label that will measure 3 inches by 4 inches, for instance, pull the pointer on the vertical ruler to 3 inches and the pointer on the horizontal ruler to 4 inches.

3. Type in the information for the whiskey. This usually includes the name of the product, where it was created and the proof. Add more information, if you wish, such as the age of the whiskey, the percentage of alcohol by volume and aspects of its history. For instance, the label could read:

   O'Shea's Original Whiskey

   Distilled and Bottled in Kentucky

   70cl e alc 40% vol.

   Or

   Old Jim Whiskey

   Isle Distilleries

   Kentucky

   80 Proof

4. Use the program's tools to enhance the appearance of the text. For instance, choose a decorative font, change the size of the font and center the text.

5. Insert a picture, if you wish. This may be at the top of the text, in the middle of the text or beneath the text. Adjust the size of the image until it is of an appropriate size for the label.

6. Insert the label sheet into the printer tray and print the label. Wait for the ink to dry completely.

7. Spray light coats of fixative spray on the label. This will seal the ink on the label so it does not bleed if it is exposed to moisture. Wait for each coat of the fixative to dry before applying the next.

8. Cut the label out of the label sheet. Peel it off the backing and place it on the whiskey bottle. Apply the label carefully to avoid creating air bubbles.