What should i do about my Tupperware lids that dont fit anymore can to make them again?

Method 1: Boiling Water:

1. Fill a pot or kettle with water and bring it to a boil.

2. Place the slightly warped Tupperware lid in the pot of boiling water for about 30 seconds to a minute.

3. Remove the lid from the hot water using tongs and gently reshape it.

4. Place the reshaped lid under cold running water to quickly cool and hold the new form.

5. Let the lid dry.

6. Try fitting it back on the container and check for improvement.

Method 2: Heat Gun:

1. If you have access to a heat gun, set it to a low-temperature setting.

2. Hold the warped Tupperware lid with tongs or wear gloves to protect your hands.

3. Use the heat gun to gently heat the distorted area for a few seconds, gradually moving the heat source around.

4. As you heat the lid, carefully shape it back into the original shape.

5. Allow the lid to cool completely before attempting to fit it on the container.

Method 3: Direct Sunlight:

1. Choose a sunny day.

2. Place the distorted Tupperware lid in a spot where it can receive direct sunlight for several hours.

3. The heat from the sun can help soften the plastic and allow the lid to reshape itself.

4. After a few hours, bring the lid inside and check if it fits better on the container.

Method 4: Hair Dryer:

1. Use a hair dryer set on a low-heat setting.

2. Hold the warped lid with tongs or wear gloves for protection.

3. Direct the warm air from the hair dryer onto the problematic area of the lid.

4. As you heat the lid, gently reshape it with your hands or a tool.

5. Let the lid cool down before checking the fit.

Note:

- While these methods can be helpful, they may not work in every case, as the material and extent of the warping may vary.

- If the lid continues to have fit issues, you might need to consider replacing it with a new lid.